| Version | E9 |
| Crypto Algorithm/Coins | Ethash/ETH/ETC |
| Hashrate, MH/s | 2400 ± 10% |
| power on wall@25℃, Watt | 1920 ± 10% |
| power efficiency on wall @25°C, J/MH | 0.8 ± 10% |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/opackage), mm(2-1 | 520*195.5*290 |
| Miner Size (Length*Width*Height,with package), mm | 680*316*430 |
| Net weight, kg (2-2) | 17.7 |
| Gross weight, kg | 19.4 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
In April 2021 Bitmain announced the data related to antminer E9 Asic miner, when the reports all said that this miner hashrate was equivalent to 32 RTX 3080 graphics cards and reached more than 3GH/s. The data has been published for a year, but it was not until June 2022 that bitmain officially sold the antminer E9 with a hashrate of only 2,400mh/s. This power is equivalent to the Linzhi Phoenix Ethash miner, the innosilicon A11 and the yami E2. the only difference is that The only difference is that the antminer E9 consumes less power, and the measured data is very close to the official one, about 1900-2000W. The other models of Linzhi Phoenix Ethash miner, innosilicon A11 and yami E2 have a power consumption of around 2400W.