| Specification parameters | |
| Model No. | F5 /F5I/F5M |
| Hashrate | 55TH/s, 60TH/s,52TH/s, ±5% |
| Currency | BTC/BCH |
| Power Efficiency | 3150W,3300W,3150W ±10% |
| Power efficiency on wall @25°C, J/TH | 52W/TH, 48W/TH，60W/TH，±5% |
| Cooling | 4 x 12038 FANs |
| Operating Temperature | 0℃~40℃ |
| Nosie | 65-80dB |
| Specification weight | |
| Net Dimensions | 340mm x 190mm x 240mm |
| Gross Dimensions | 390mm x 290mm x 395mm |
| Net weight, kg(2-2) | 13.5kg/13.8kg/13.8kg |
| Gross weight, kg | 14.5kg |
Based on the accumulated experience of F1 and F3 miners, F5 is improved and optimized better, and its stability and heat resistance are much better than F3, but it is still not resistant to transportation. As hashrate is higher and price is lower, miners in some countries with lower electricity cost still like this miner. For customers who want to buy the Cheetah F5, we suggest that they ask the business to test it when they buy it, and the most important point is that they should never save money on the packaging and try to wrap it as thickly as possible so that they can reduce the loss of transportation.| Specification parameters | |
| Model No. | F3 |
| Hashrate | 30TH/s |
| Currency | BTC/BCH |
| Power Efficiency | 2200W ±10% |
| Power efficiency on wall @25°C, J/TH | 48W/TH±10% |
| Chips | SAMSUNG 10MM ASIC CHIP |
| Operating Temperature | 0℃~40℃ |
| Rated voltage | 14.5-15.5v |
| Net Dimensions | 266mm x 200mm x 230mm |
| Net weight, kg(2-2) | 4.5KG |
The Cheetah F3 is optimized and improved on the basis of the Cheetah F1, and its stability and heat resistance are somewhat better than the F1, but it is still not resistant to transportation. Since the production of Cheetah F3 and F1 is not much and the quality is not good enough, there is not much circulation in the used crypto miner market.
| Specification parameters | |
| Model No. | F1 |
| Hashrate | 24TH/s |
| Currency | BTC/BCH |
| Power Efficiency | 22100W ±10% |
| Power efficiency on wall @25°C, J/TH | 48W/TH±10% |
| Chips | SAMSUNG 10MM ASIC CHIP |
| Operating Temperature | 0℃~40℃ |
| Rated voltage | 14.5-15.5v |
| Net Dimensions | 266mm x 180mm x 230mm |
| Net weight, kg(2-2) | 4.5KG |
Cheetah's first series of F BTC miners started with the F1. F1 24T miners had much worse performance when they were first produced compared to the Antminer S11/S15/T15 miners of the same grade. The F1 24T miner is not very heat resistant, not very stable, and not very resistant to transportation, so the damage rate can reach 20-30% just by transporting it from the factory to the farm in China, not to mention shipping it abroad. If shipped from China to foreign countries, the damage rate can reach more than 50%.
The only advantage of F1-24T is the price is very low, because of the cheap, so the lack of materials and program design, resulting in poor quality
